U-CONNECTION PROFILE
PS0112X
The edges of the panel are not visible when the cabin system spins thanks to the application of this connection piece.
The U profile’s exterior dimensions will be 22 x 15 mm, with a wall thickness of 1.5 mm.
It will be used to link U profile-Wall and U profile-Divider Panels.
Its dimensions are 4.2 x 11 mm. Thick threaded, stainless steel screws are used to fasten it.
TOP PANEL PROFILE
PS0512X
Profiles will be installed on the cabinet system’s top, front, and side edges.
A curved profile with dimensions of 50 mm x 45 mm and a wall thickness of 1.2 mm will be utilized as the header profile
CORNER CONNECTION PROFILE
PS0412X
The edges of the panel are not visible when the cabin system spins thanks to the application of this connection piece.
Size: 30 × 30 mm.
Compact laminate panels will grab the corner profile on all sides.
This product attached using 304 grade stainless steel screws with a coarse thread measuring 4,2 x 11 mm
LEGS
SS01XO12
They're compatible with both 12 mm and 18 mm HPL pannels.
This accessory's adjustable height ranges from 150mm to 200mm. It aids in the adaptation to all types of sloping slopes in wet areas. The carrying capacity is 70 kilograms.
It's linked to the anti-bacterial plastic floor.
Body is produced with 304 stainless steel.
0,222 kg
LEGS
SS02XO12
They're compatible with both 12 mm and 18 mm HPL pannels.
This accessory's adjustable height ranges from 100mm to 150mm. It aids in the adaptation to all types of sloping slopes in wet areas. The carrying capacity is 70 kilograms.
It's linked to the anti-bacterial plastic floor.
Body is produced with 304 stainless steel.
0,278 kg
HINGE
SS03XO12
It is a spring-driven device that enables self-closing doors for single-face (lamp-and-groove) door systems.
Metal components are made of 304 quality stainless steel.
They're compatible with both 12 mm and 18 mm HPL pannels.
0,220 kg
HINGE
SS04XO12
It is a spring-driven device that enables self-closing doors for single-face (lamp-and-groove) door systems.
Metal components are made of 304 quality stainless steel.
They're compatible with both 12 mm and 18 mm HPL pannels.
0,236 kg
LOCK
SS05CO12
They're compatible with both 12 mm and 18 mm HPL pannels.
It has a latch and dial, and with the colored mechanism (red-green) on it, it displays from the outside whether the door is busy or not, and it is interfered from the outside in case of an emergency.
They are made of 304 quality stainless steel.
It has a 304 quality stainless steel profile latch, twisted body, and arm. The exterior cover has an on/off indication. For emergency interventions, there is a handle inside that may be opened with any pointed item from the outside. It uses the latch turning mechanism to lock.
0,186 kg
HANGER
SS08XO12
It's made of 304 quality stainless steel.It contains a plastic stopper at the tip that functions as a stopper and softens impacts.
It is capable of carrying up to 10 kilograms.
0,68 kg
GRIP
SS09XO12
It has a diameter of 35 mm and a length of 40 mm and is constructed of 304 stainless steel.
M6x35 stainless steel screw connection is utilized on both sides to open the door.
0,256 kg
PANEL CONNECTION
SS10XO12
They're compatible with 12 mm HPL pannels.
The top panel connecting component is made of 304 quality stainless steel.
With the steel screw, it gives complete strength with compression.
0,146 kg
WALL CONNECTION
SS11XO12
They're compatible with both 12 mm and 18 mm HPL pannels.
Top panel fixed holder made of 304 quality stalline stainless steel. This product is used to install the original top panel connecting pipe to the wall.
It is attached to the floor using stainless screws from at least three distinct spots to the wall (with the PA6 shoes connected).
0,46 kg
DELUX GRIP
SS15XO12
This product series is produced in lengths of 40, 80, and 120 cm.
It's attached to the front of the cabinets. It is installed as a single face on the front of the doors. On the rear, a standard handle is employed.
SANDER guarantees that this product may be made in a variety of sizes upon request.
TOP PANNEL BRACKET
SS17XO12
They're compatible with both 12 mm and 18 mm HPL pannels.
Top header connection. It is made of 304 stainless steel and has a diameter of 30 x 1.5mm.